Physical Quantities and Measurement — Complete Notes
What is Physics?
Physics is the branch of science that studies matter, energy and their interaction. Everything from a falling apple to the working of a mobile phone is explained by the laws of physics.
Main branches of physics:
Physical quantities
A physical quantity is anything that can be measured and expressed as a number with a unit, for example length, mass and time. Every physical quantity has two parts:
- a **numerical value** (magnitude), and
- a **unit**.
> Example: 5 kg → 5 is the magnitude, kg is the unit.
Base and derived quantities
Base quantities are independent quantities on which other quantities are built. The SI system has seven base quantities:
Derived quantities are obtained by combining base quantities. Examples:
- Area = length × width → **m²**
- Speed = distance ÷ time → **m s⁻¹**
- Force = mass × acceleration → **kg m s⁻²**, called the **newton (N)**
International System of Units (SI)
SI is the system of units used by scientists all over the world. It is based on the seven base units above. Using one system avoids confusion when results are shared internationally.
Prefixes
Prefixes are used for very large or very small values.
> Example: 5 km = 5 × 10³ m = 5000 m
Scientific notation
In scientific notation a number is written as a × 10ⁿ, where 1 ≤ a < 10 and n is a whole number.
- 150 000 000 m = **1.5 × 10⁸ m**
- 0.00045 s = **4.5 × 10⁻⁴ s**
Measuring instruments
Metre rule
Measures length up to 1 m with a least count of 1 mm (0.1 cm). Keep your eye directly above the reading to avoid parallax error.
Vernier callipers
Measures length, diameter and depth more accurately.
- **Least count = 0.1 mm = 0.01 cm**
- Reading = main scale reading + (vernier division coinciding × least count)
- Always check and correct the **zero error**.
Screw gauge (micrometer)
Used for very small lengths such as the diameter of a wire.
- Pitch = distance moved by the spindle in one rotation (usually 0.5 mm or 1 mm)
- **Least count = pitch ÷ number of circular divisions** (e.g. 0.5 mm ÷ 50 = 0.01 mm)
Other instruments
- **Physical balance / electronic balance** — mass
- **Stopwatch** — time (mechanical: 0.1 s, digital: 0.01 s)
- **Measuring cylinder** — volume of liquids and irregular solids (read the bottom of the meniscus)
Errors and uncertainty
No measurement is perfectly exact. Main types of error:
- **Random error** — changes from reading to reading; reduced by taking several readings and finding the average.
- **Systematic error** — same error every time (e.g. zero error of an instrument); removed by correcting the instrument.
- **Human error** — mistakes like parallax.
Significant figures
Significant figures are the reliable digits in a measurement plus the first uncertain digit.
Rules:
1. All non-zero digits are significant → 245 has 3.
2. Zeros between non-zero digits are significant → 2005 has 4.
3. Leading zeros are not significant → 0.0032 has 2.
4. Trailing zeros after a decimal point are significant → 2.50 has 3.
Quick revision
- SI has **7 base quantities**; all others are derived.
- Vernier callipers least count = **0.01 cm**; screw gauge = **0.001 cm (0.01 mm)**.
- Take several readings and average them to reduce random error.
- Write very large or small numbers in **scientific notation**.